Mastercraft
Mastercraft 6A Corded Single-Speed Angle Grinder with Bonus Cut-Off Disc & Guard, 4-1/2-in
#054-7153-6
$59.99
Top RatedExclusive
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.
Quebec residents: For information on maintenance and repair click here.
Product Details
The Mastercraft 6A Corded Single-Speed Angle Grinder offers superior performance and versatility with a bonus cutting disc and guard for safer operation. This powerful corded angle grinder has a motor that delivers 11,000 RPM of speed to swiftly take on any DIY task. It also comes with auxiliary handles that feature three different mounting positions to suit any requirement. The tool-free guard adjustment of this 120V angle grinder lets you easily remove or change the angle of the guard as needed.
The Mastercraft 4.5" 6A Angle Grinder includes a bonus cutting disc and guard for safer operation and maximum versatility
Powerful 6A motor delivers 11,000 RPM (no-load)
Auxiliary handle offers three different mounting positions
Integrated spindle lock for rapid disc changes
Tool-free guard adjustment allows you to easily remove or adjust the angle of the guard as-needed
Lock-on button for continuous use
Includes: angle grinder, removable cutting guard, removable grinding guard, 4.5" (115 mm) cutting disc, 4.5" (115 mm) grinding disc, auxiliary handle and wrench
Motor: 120V, 60Hz, 6A
Single speed: 11,000 RPM (no-load)
Arbour size: 5/8" (16 mm)
Disc diameter: 4.5" (115 mm)
Tool weight: 4 lb 3 oz (1.89 kg)
| Part Number | AG01H |
|---|---|
| Accessories List | Grinding Disc, Blade Guards, Auxiliary Handle, Wrench |
| Arbor Diameter (in) | 5/8" |
| Case Type | Not Included |
| Cord Gauge (ga) | 16ga |
| Cord Length (ft) | 6.6 ft |
| Cord Length (m) | 2.00 m |
| Cord Type | Plastic |
| Cordless Indicator | No |
| Disc Diameter (in) | 4.5 " |
| Grinder Type | Angle Grinder |
|---|---|
| Grinding Wheel Included | Yes |
| Guard Type (s) | Cutting, Grinding |
| Integrated LED | No |
| Keyless Change Indicator | No |
| Motor Type | Brushed |
| No-Load Speed Range (rpm) | 11000 - 11000 |
| Number of Accessories | 6 |
| Overload Protection | No |
| Package Depth (cm) | 33.90 cm |
| Package Depth (in) | 13.35 in |
| Package Height (cm) | 12.50 cm |
| Package Height (in) | 4.92 in |
| Package Weight (kg) | 3.00 kg |
| Package Weight (lb) | 6.61 lb |
| Package Width (cm) | 14.50 cm |
| Package Width (in) | 5.71 in |
| Product Model Number | AG01H |
| Variable Speed | No |
Warranty
- This product carries a 3 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | ||||||
| Ratings | ||||||
| Accessories List | Grinding Disc, Blade Guards, Auxiliary Handle, Wrench | Grinding Disc, Blade Guards, Auxiliary Handle, Wrench | Grinding Disc, Blade Guards, Auxiliary Handle, Wrench | Grinding Disc, Blade Guards, Auxiliary Handle, Wrench | Blade Guards, Auxiliary Handle, Wrench, Grinding Wheel | |
| Arbor Diameter (in) | 5/8" | 5/8" | 7/8" | 5/8" | 5/8" | |
| Case Type | Not Included | Not Included | Not Included | Not Included | Soft Bag |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Reviews
Customer Images and Videos
Filter Reviews
- price
- purchase
- quality
- cutting
- value
- small
- satisfaction
- functional
Rating
Locale
1 to 5 of 260 Reviews
1 – 5 of 260 Reviews
Most Recent
5 out of 5 stars.
great tool
8 months ago
Great value for the money. I do a lot of grinding and zip cutting on structural steel. I normally spend 2-3 hours at a time on steel.
Helpful?
5 out of 5 stars.
Angle grinder
a year ago
Cheap lawn mower blade sharpener. This grinder with a 60 grit flap disc does the trick
Helpful?
5 out of 5 stars.
Performance
a year ago
4 out of 5 stars.
Nifty little Grinder
a year ago
Works well, but the guard collars should be simpler (no quick change design) so the guards can be rotated at any angle for ease of use.
Helpful?
5 out of 5 stars.
Great grinder but it on sale.
a year ago
Great grinder for the price. Used to strip paint from deck. Paid for itself in the first day. Much better results then pressure washer and stripper combined
Helpful?
1 – 5 of 260 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 17 Questions
Most helpful answers
Q: The blades that come with it are unmarked, are they metal or masonry?
2 years ago2 Answers
A: mine came with metal cut off blades
2 years agoHelpful?
Q: Can this be used to cut a fully threaded steel rod?
3 years ago2 Answers
A: Yes, this grinder made quick work of my coil springs on my car and would easily cut a threaded steel rod
3 years agoHelpful?
Q: This is regarding the 6A angle grinder with cutting wheels. Can the cutting this wheel cut, a 2 feet metal sheet (18 gauge) in a continuous run. certain reviews on other brands have negative views on the cutting ability. How is this Mastercraft model?
3 years ago2 Answers
A: As long as you have a good cutoff wheel and rake your time the should be no problem
3 years agoHelpful?
Q: It says it has a 5/8 inch bore. Does it include an adapter so that cutting wheels with a 7/8 inch bore could be used?
5 years ago2 Answers
A: That answer is incorrect. Yes, the arbor is 5/8 and will take 5/8 threaded attachments, but the backing flange and threaded nut for holding non-threaded disks have a flange to 7/8 hole size, so that it is intended to take 7/8 bore wheels. In fact, the included grinding wheel and cutoff wheel are 7/8 bore.
3 years agoHelpful?
Q: why is this grinder not recommended for wire brushing? Which one is? The manual says this tool is not recommended for wire brushing. I bought it for this use alone. I need to remove some rust. Should I return it? Which one should I get?
8 years ago2 Answers
A: I could say lots about this grinder but it was for the version just befor this one and it was junk ! It never saw any heavy duty work & was treated well. It died just shortly after the warranty ran out. As I can usually fix most things, I took it apart only to find that the bearings were gone. All that was left was the inner and outer race. This renders the tool useless ! I wish I had bought it on sale. Maybe a bit more money but I would strongly recomend a Makita.
8 years agoHelpful?
Q: Grandeur Arbre à filetage 5/8 ou 7/8? Bonjour, je voudrais savoir c'est quoi la grandeur de Arbre à filetage de l'appareil 5/8 ou 7/8? merci
9 years ago2 Answers
- Translate with Google
A: C'est 5/8? pourtant en zoomant sur l'image on voit que c'est 7/8 les disques qui sont dessus donc cela devrait être 7/8 non? De plus, si je regarde tous vos kits de disque a vendre pour couper, ils sont tous à 7/8 donc il n'y a pas rien qui fit dessus? ou bien je comprend mal le fonctionnement de celle-ci. merci
9 years agoHelpful?
Q: What kind of grinder and how much amperes do i need for cutting metal ?
2 years ago1 Answer
A: It is not possible to answer your question as there are too many factors to consider, such as frequency, gauge of metal, etc. Using a metal cutting disc and allowing the tool to do the work, i.e., don't apply excessive pressure to get a quicker cut, this grinder can cut through most common metal applications. Larger amperage grinders will allow you to apply greater pressure, to get a faster cut, without burning out the motor. If you are doing one-off applications, you will be fine with a 6A or 9A grinder. If you are doing production type applications, look to a greater amperage, or go to a brushless cordless grinder such as the Maximum 40V grinder.
2 years agoHelpful?
Q: Can you use straight (not depressed) cut off wheels with this grinder? Manual on page 17 says Depressed centre wheel must be used with included flanges... does that mean you can't use non depressed because you can't install any disc without the flanges?
2 years ago1 Answer
A: Yes, you can use flat discs, as long as they have a 5/8" bore.
2 years agoHelpful?
Q: Will it work on stone , taking off 1/8 inch
2 years ago1 Answer
A: The tool is capable of grinding stone and concrete. You do not describe the total surface area you are attempting to remove 1/8". If extensive, the tool will require 'rests' throughout the operation and pressure applied should not be severe. The tool also comes with a metal application disc. You may benefit from purchasing masonry discs if your task is more than a simple reduction.
2 years agoHelpful?
Q: Où peut on se procurer un nouveau protecteur de disque? Merci
4 years ago1 Answer
- Translate with Google
A: Malheureusement, les broyeurs MC ne font actuellement pas l'objet d'un programme de service de réparation et les pièces ne sont donc pas offertes. Pour obtenir une pièce de remplacement, il faudrait l'expédier de la Chine. Le coût de la pièce sera alors beaucoup plus élevé que le prix d'achat d'un nouveau broyeur.
4 years agoHelpful?
1 - 10 of 17 Questions
