This paragraph should be hidden.
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Quebec residents: For information on maintenance and repair click here.
This TIG foot pedal controls the amperage when TIG welding. Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the after-flow cycle. This foot pedal will give the optimum amperage needed for any TIG welding project.
Lincoln Electric Foot Amptrol™ for improved control over TIG welding processes
Depressing pedal allows for foot control over welding current
Equipped with a 6-pin connector and optional heel rest
For use with the MIG-Pak® 140 Multi-Process Welder (058-8197) exclusively
| Part Number | K4361-1 |
|---|---|
| Assembled Height (cm) | 8.89 cm |
| Assembled Height (ft) | 0.29 ft |
| Assembled Height (in) | 3.50 in |
| Assembled Length (cm) | 21.59 cm |
| Assembled Length (ft) | 0.71 ft |
| Assembled Length (in) | 8.50 in |
| Assembled Weight (kg) | 1.81 kg |
| Assembled Weight (lb) | 3.99 lb |
| Assembled Width (cm) | 26.67 cm |
| Assembled Width (ft) | 0.88 ft |
|---|---|
| Assembled Width (in) | 10.50 in |
| Assembled Width (mm) | 266.70 mm |
| Colour | Black |
| Number of Pieces | 1 |
| Package Depth (cm) | 25.40 cm |
| Package Depth (in) | 10.00 in |
| Package Height (cm) | 8.89 cm |
| Package Height (in) | 3.50 in |
| Package Weight (kg) | 3.63 kg |
| Package Weight (lb) | 8.00 lb |
| Package Width (cm) | 21.59 cm |
| Package Width (in) | 8.50 in |
| Primary Material | Brass |
| Product Model Number | KH833 |
| Welder Accessory Type | Other |
Only Show Differences | ||||||
| Ratings | ||||||
| Assembled Height (cm) | 8.89 cm | |||||
| Assembled Height (ft) | 0.29 ft | |||||
| Assembled Height (in) | 3.50 in |
