Kidde
Kidde Worry-Free 120V Hardwired Talking Smoke and Carbon Monoxide (CO) Alarm With 10-Year Sealed Battery
#046-0349-4
$89.99
Top Rated
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.
Quebec residents: For information on maintenance and repair click here.
Product Details
The Kidde i12010SCOCA is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor – which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires – with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one.
2-in-1 combination smoke and carbon monoxide alarm
Features 10 year sealed battery that never needs changing for the life of the alarm
Ideal for living areas
Hush® Feature – Temporarily silences nuisance alarms for approximately 9 minutes (smoke must be present before Hush® is activated)
At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement
Voice Warning – Announces the hazard type detected (in both English and French)
Hardwired 120V with 10-year battery backup
Test Feature – Simultaneously tests the unit’s electronics and verifies alarm operation
Tamper Resist Feature – Unit will lock to mounting bracket to deter theft or tampering
| Part Number | 21027905 |
|---|---|
| Product Use(s) | Carbon Monoxide Detector, Smoke Detector |
| Alarm Type | Beep, Talking |
| Sensor Type(s) | Microprocessor Based |
| Power Source | Hardwired |
| Battery Technology | Lithium Polymer |
| Battery Type/Battery Size | Battery Pack |
| Accessories List | Backup Battery, Batteries Included, Mounting Hardware |
| Primary Colour | White |
| Consumer Pack Size | 1 |
| Certifications | UL Listed |
|---|---|
| Smart System Compatibility | No Smart Technology |
| Audible Alarm Strength (db) | 85 dB |
| Minimum Operating Temperature (°C) | 4.40 °C |
| Maximum Operating Temperature (°C) | 37.80 °C |
| Range (ft) | 0.00 ft |
| Cord Length (ft) | 0.00 ft |
| Advanced Features | Continuous Duty, Low Battery Indicator, Mute Button, Reset Button, Tamper-Resistant, Testing Button |
| Shelf Life (year) | 10 yr |
| Assembled Length (in) | 5.59 in |
| Assembled Width (in) | 1.93 in |
| Assembled Height (in) | 5.59 in |
Warranty
- This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | ||||||
| Ratings | ||||||
| Product Use(s) | Carbon Monoxide Detector, Smoke Detector | Carbon Monoxide Detector, Smoke Detector | Carbon Monoxide Detector, Smoke Detector | Smoke Detector | Carbon Monoxide Detector | |
| Alarm Type | Beep, Talking | Beep, Talking, Flashing Light | Beep, Talking, Flashing Light | Beep, Flashing Light | Beep | |
| Sensor Type(s) | Microprocessor Based | Electro-Chemical, Microprocessor Based | Electro-Chemical, Microprocessor Based | Microprocessor Based | Electro-Chemical |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Suitable Cons could not be generated at this time.
Reviews
Customer Images and Videos
Filter Reviews
- installation
- battery
- purchase
- price
- instructions
- batteries
- mounting
- satisfaction
Rating
Locale
1 to 5 of 122 Reviews
1 – 5 of 122 Reviews
Most Recent
1 out of 5 stars.
Jofree
a year ago
While I am happy with the alarm I am not happy with the company disco ntinuing this model or the $20. difference in price between stores.
Helpful?
5 out of 5 stars.
Prise compatible après 10 ans
a year ago
Je l’ai acheté pour remplacer un Kidde qui avait plus de 10 ans et que le service d’incendie de la municipalité demandait donc de remplacer. L’avantage : la prise de raccordement est identique même après plus de 10 ans. Enfin, une entreprise qui semble comprendre que c’est une bonne idée de ne pas changer de prise… Apple devrait prendre exemple !
Translate with GoogleHelpful?
1 out of 5 stars.
False alarms
a year ago
Too many false alarms
Helpful?
4 out of 5 stars.
Alarm works
a year ago
Working fine. Easy to install could use old Kiddie plate even though it was 10 years old.
Helpful?
4 out of 5 stars.
Like the Talking Smoke alarm but you will need room in your electrical box
a year ago
I like the idea of it not having to change the batteries. Hopefully that is true. Only issue is there is an extra bump so you need to make extra room in the electrical box so its flush. If you have lots of wiring, it can be tight. Only reason I am not making it 5 stars.
Helpful?
1 – 5 of 122 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 17 Questions
Most helpful answers
Q: The beep sound is on doesn't reset to science
a year ago2 Answers
A: Please contact the product support line at 1-800-880-6788 with the alarm in hand and they will help you troubleshoot.
a year agoHelpful?
Q: Quelle est la garantie ?
3 years ago2 Answers
- Translate with Google
A: 10 ans pour la pile, c'est écrit sur l'emballage
3 years agoHelpful?
Q: What is the Kidde model number for this smoke detector. Can. Tire art. # 046-0349-4
4 years ago1 Answer
A: The model is the i12010S-CO-CA
4 years agoHelpful?
Q: I am replacing model # KN-COSM-IBCA. It is a smoke and carbon monoxide alarm. What model # can I purchase to replace it....without changing the mounting bracket and wiring harness?
5 years ago1 Answer
A: All Kidde Hardwaired alarms will use the same wiring harness.
5 years agoHelpful?
Q: Where is the battery and how to replace it?
6 years ago1 Answer
A: This alarm has a 10 year sealed lithium battery that cannot be changed. If your current alarm is chirping low battery, call the tech support line at 1-800-880-6788 and they can help, including warranty replacement if necessary.
6 years agoHelpful?
Q: My Kidde Smoke & CO Alarm model KN-COSM-ICA needs to be replaced. Will this unit be able to replace it easily (e.g. same wiring, same 3-pins at the back, same mounting bracket, same AC Quick Connect Wire, etc.)? Thank you.
6 years ago1 Answer
A: Yes it will. All Kidde hardwired alarms use the same wiring harness. Brackets can vary but they are easy to change with just 2 screws to loosen.
6 years agoHelpful?
Q: Does this unit run off 120v and use battery for backup? or run off battery and use 120v incase of battery failure? have read both scenarios, noone seems to know.
7 years ago1 Answer
A: This alarm uses 120VAC from the house to operate. The lithium battery is a backup that will last about two weeks without power and sound the alarm for 4 hours if something was detected (ULC requirement).
7 years agoHelpful?
Q: Can you interconnect two units.
7 years ago1 Answer
A: Yes they can be connected with any Kidde Alarms. You can connect up to 12 Alarms together.
7 years agoHelpful?
Q: we have 3 of these units in a 1 year + 1 month old home. Three nights in a row one of these units started going - all about the same time: 6:40 pm. No reason, and then put back up and is quiet until next night, same time .. wazzup with that?! tks
7 years ago1 Answer
A: There are many reasons for an ionization alarm to chirp. Please see the possibilities below. PLEASE NOTE! if the alarm is chirping due to one of these condition and you press the hush button, the unit will silence for 24 hours, at which point it will verify if the fault condition from the first time is still present. If so, it will chirp again. 1. The smoke alarm sensing chamber may be dirty. Dust and insects can collect in the sensing chamber of the alarm. An accumulation of dust in the sensing chamber can cause the unit to chirp. It is good practice to clean the smoke alarm when you change the battery. Static electricity from the ac quick connector attracts dust and can cause false alarms. Cleaning smoke alarms: To clean your alarm, remove it from the mounting bracket. You can clean the interior of your alarm (sensing chamber) by using compressed air or a vacuum cleaner hose and blowing or vacuuming through the openings around the perimeter of the alarm. The outside of the alarm can be wiped with a damp cloth. After cleaning, reinstall your alarm, verify the green LED is on and test your alarm by using the Test Button. If cleaning does not restore the alarm to normal operation, the alarm should be replaced. 2. Check environmental conditions: Humidity, steam and condensation can cause false alarms. Causes of condensation are: Extreme or rapid temperatures changes (as little as 3 degrees Celsius in a few minutes). High ambient humidity. Unit being installed in an un-insulated electrical box mounted on a ceiling beneath an attic. If this condition exists you'll want to move the alarm. Check to see if there is a cooling/heating register, a ceiling fan or an open window within 3 feet of the alarm. If there is, move the alarm away from the source of the increased airflow. 3. Check the temperature of the room. Smoke alarms operate at 40 degrees to 95 degrees Fahrenheit. 4. Reset the alarm. Some current model smoke alarms have a processor that retains certain error conditions, such as a weak battery. The error condition should reset when the battery is replaced but sometimes it does not and must be manually reset to clear the error. To reset a 10 year alarm, perform the following steps: Press the test button – let it run its test cycle. DO NOT PRESS HUSH OR TEST UNTIL FINISHED. 5. An electrical condition may be causing the power to the unit to be interrupted. If the AC power to the unit is interrupted, the unit will chirp when the power is restored. This could be caused by power surges. If the chirping seems to occur at about the same time in the evening or morning, it could be due to a surge created when the power company switches electrical grids to meet demand. Check to see if the chirp (or chirping) occurs when something else in the house is turned on such as an exhaust or attic fan, a heater, etc. If the smoke alarm is connected to a circuit with such a device, the alarm may chirp when the other device is switched on. If this is the case and the device is plugged into a wall outlet, move it to another outlet on a different circuit. If it is a hardwired device, have an electrician investigate it. These conditions can be minimized by installing your alarms on a dedicated circuit in compliance with NFPA requirements. If none of these resolve the issue, please call tech support at 1-800-880-6788.
7 years agoHelpful?
Q: Is this model an ionization or photoelectric alarm?
7 years ago1 Answer
A: This is an ionization smoke and CO alarm. The specification section on the item's page has the information.
7 years agoHelpful?
1 - 10 of 17 Questions
