Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 3-Ton
- FREEAvailable
- Available
- Available
Pick up available 01:00 p.m., Jan 03
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
These Certified Heavy-Duty Steel Jack and Axle Stands allows you to complete simple vehicle-maintenance tasks in your own garage. Featuring a heavy-duty construction with a wide base for enhanced stability, this pair of jack stands allows you to lift one end of your vehicle for tire change-overs and other jobs. A must-have item for the DIY mechanic, these axle stands have an innovative design that makes height adjustments easy for seamless use.
- Features
- Specifications
- Resources
Easily lift passenger, low-profile, SUV, van and light truck vehicles to perform vehicle repairs and tasks like tire changes, oil changes and more
Heavy-duty steel frame and wide-stance base for added durability and stability when in use
Ratcheting design allows for easy height adjustment
Baked enamel finish for corrosion resistance and lasting use
ANSI Certified
Lift Range: 11-1/2" to 16-3/8" (29.2 cm to 41.6 cm)
Capacity: 3 Tons (6,000 lbs)
Always use stand in pairs on hard, level surfaces
Read and understand warnings and operating instruction before use to ensure safety
| Part Number | DJJS002 |
|---|---|
| Accessories List | No Accessories Included |
| Advanced Features | Adjustable Height, Easy Assembly |
| Assembled Height (cm) | 28.80 cm |
| Assembled Height (ft) | 0.94 ft |
| Assembled Height (in) | 11.34 in |
| Assembled Length (cm) | 19.50 cm |
| Assembled Length (ft) | 0.64 ft |
| Assembled Length (in) | 7.68 in |
| Assembled Weight (kg) | 6.00 kg |
| Assembled Weight (lb) | 13.23 lb |
|---|---|
| Assembled Width (cm) | 17.30 cm |
| Assembled Width (in) | 6.81 in |
| Assembled Width (mm) | 173.00 mm |
| Certifications | ANSI Certified |
| Consumer Pack Size | 1 |
| Finish | Powder Coated |
| Maximum Lift Height | 16.77 in |
| Maximum Lift Height (cm) | 42.60 cm |
| Maximum Weight Capacity (g) | 2721000.00 g |
| Maximum Weight Capacity (kg) | 2721.00 kg |
| Maximum Weight Capacity (lb) | 5998.77 lb |
| Minimum Lift Height (cm) | 28.80 cm |
| Minimum Lift Height (in) | 11.34 in |
| Number of Pieces | 2 |
| Package Depth (cm) | 21.00 cm |
| Package Depth (in) | 8.27 in |
| Package Height (cm) | 33.30 cm |
| Package Height (in) | 13.11 in |
| Package Weight (kg) | 6.30 kg |
| Package Weight (lb) | 13.89 lb |
| Package Width (cm) | 20.00 cm |
| Package Width (in) | 7.87 in |
| Primary Colour | Blue |
| Primary Material | Steel |
| Type of Lift/Stand | Jack Stands |
Warranty
This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Accessories List | No Accessories Included | No Accessories Included | No Accessories Included | No Accessories Included | No Accessories Included | |
| Advanced Features | Adjustable Height, Easy Assembly | Adjustable Height, Easy Assembly | Adjustable Height, Easy Assembly | Adjustable Height, Easy Assembly | Adjustable Height, Double Pin Locking, Easy Adjustments, Easy Assembly, Fast Lifting, Heavy Duty, Includes Handle, Locking, Stable Base | |
| Assembled Height (cm) | 28.80 cm | 28.80 cm | 29.70 cm | 28.80 cm | 28.50 cm |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
Pros
Cons
Reviews
Customer Images and Videos
Filter Reviews
- standing
- price
- quality
- purchase
- safety
- sturdy
- value
- functional
What
Originally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
Fonctionne très bien
floor jack
Originally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
Awesome
Good quality for the price recommended
Originally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
Questions
Q: Is this enough to hold my 2009 Honda Civic Sedan?
11 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: 2-tons doesn't convert to 2000lbs although the 1,814.37kg is right. That would be 4000 pounds. So technically both would support a total of 8000 pounds. Bear in mind that your car's weight is never going to be fully on one stand so even if your car is 4000 pounds, it will still be less weight on the stand itself because the other wheels on the ground are supporting the weight. Short answer, you'll be fine.
11 years agoHelpful?
Q: Is the lift capacity for each stand or for the pair? Some manufacturers announce the lift capacity for the pair (Pro-Lift specifies that in there Owner's Manual)!!!
14 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: Each
9 years agoHelpful?
Q: Will the 2-ton verson hold my Van? Will the cheaper option hold my Honda Odysey or Nissan Maxima sedan?
14 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: It depends. Please verify the curb weight of each vehicle and cross-check with the load capacity. 2-Tons converts to 2000lbs (or 1,814.37kg), for a total of 4,000 pounds across both stand. Your van will definitely weight more than 4,000 pounds, so we would recommend the 3-Ton stands.
14 years agoHelpful?
Q: How do I use this? If I am understanding the usage of this device properly, you would first jack up one side of the car then place one beside the jack, lower jack and repeat on the other side?
14 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: Yes, that is correct. Be sure to only to use the jacking points designated by the vehicle manufacturer.
14 years agoHelpful?
Q: Where exactly are these placed? Are there a special notches under every car made especially for these devices?
14 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: Yes; however, the location can differ slightly depending on the vehicle. Be sure to only to use the jacking points designated by the vehicle manufacturer. Generally, the jacking points are located along the side of the chassis, usually indicated by an indented circle, which you can see when bending over.
14 years agoHelpful?
Q: how much does the 2 pack weigh? i cant figure this out!
15 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: Depends on the model - try it out at the store! They're quite heavy, but for a good reason! A grown man can carry one 6 ton stand in each hand, but it's definitely not light with the cast iron saddle post.
14 years agoHelpful?
Q: Will the 3 ton jacks support an F350? 07 F350 4x4 non dually.
15 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: NO!!! It may well hold, but this vehicle is way over in GVW, furthermore, considering how tall this pickup is, the 3 ton stand is way too short and narrow at the base. NOT RECOMMENDED!
14 years agoHelpful?
Q: What are the dimensions of the saddle for the 3-Ton model? (Length and width)
5 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: The Certified Axle Stands Pair, 3-Ton (009-0011) saddle dimensions are as followed: Saddle outer length: 8.8cm Saddle inner length: 6.5cm Saddle width: 2.3cm
5 years agoHelpful?
Q: are these by the same manufacturer as the ones Harbour Freight is recalling in the US
5 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: No, we do not have reason to believe our jack stands are affected and our current supplier has confirmed this. Additionally, the factory we purchase our jack stands from does not supply items under recall with retailers in the USA. Please know, the issue with the recall is with the design of the ratchet and our jack stands have a more robust design than those under recall. We hope you find this reassuring while reviewing our current assortment.
5 years agoHelpful?
Q: Im wondering if the six ton are each 6 ton or they both equal 6 ton
5 years agoOriginally posted on Certified Heavy-Duty Steel Jack and Axle Stands, Pair, 2-Ton
A: The weight capacity of our Certified Jack Stand pairs are rated for a combined load distributed across the pair (2pcs) of Jack Stands, not per piece/stand. The 6-ton stands are rated for 5,443 KG distributed across the pair of two stands.
5 years agoHelpful?
