BernzOmatic
Bernzomatic Aluminum Brazing & Welding Rods, 2-Pk
#058-0046-6
$12.99
Buy Online :
- FREEAvailable
- Available
- Available
Pick up at Leduc, AB
13 In Stock
Pick up available 09:00 a.m., Jan 03
Quantity updated to 1
Also Find It in Store:
13 In Stock at Leduc, AB
Aisle 22
Add to Registry
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
The Bernzomatic® Aluminum Brazing and Welding Rods are great tools for a variety of tasks including soldering or repairing aluminum windows, doors, gutters and siding. They are easy to use whether you're on a job site or completing a project at home. With a low working temperature of 720 to 750 degrees Fahrenheit, these rods can also be used to build up aluminum joints without distortion, discoloration or loss of strength. They have a tensile strength of 33,000 psi. Package includes two rods.
Aluminum Solder Rods feature high-tensile strength for strong metal joints
Minimizes joined metals cracking and distortion
Soft and flexible for ease of use
Lowers metal joining temperature
Tensile strength: 25,000 psi
700 to 750°F (371 - 399°C) melting temperature
Includes 2 rods
| Part Number | 328636 |
|---|---|
| Advanced Features | No Advanced Features |
| Assembled Height (cm) | 36.83 cm |
| Assembled Height (ft) | 1.21 ft |
| Assembled Height (in) | 14.50 in |
| Assembled Length (cm) | 0.51 cm |
| Assembled Length (ft) | 0.02 ft |
| Assembled Length (in) | 0.20 in |
| Assembled Weight (kg) | 0.09 kg |
| Assembled Weight (lb) | 0.20 lb |
| Assembled Width (cm) | 5.08 cm |
|---|---|
| Assembled Width (in) | 2.00 in |
| Assembled Width (mm) | 50.80 mm |
| Electrode Classification | Not Applicable |
| Number of Pieces | 2 |
| Pneumatic Fasteners Type | Brazing Rod |
| Primary Material | Aluminum |
| Product Use(s) | General Purpose, Plumbing, Sheet Metal |
| Welding Position | All Position |
Warranty
- This product carries a special warranty. Please see your local Canadian Tire store for details.
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Advanced Features | No Advanced Features | No Advanced Features | Flux Coated | Flux Coated | No Advanced Features | |
| Assembled Height (cm) | 36.83 cm | |||||
| Assembled Height (ft) | 1.21 ft |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Suitable Cons could not be generated at this time.
Reviews
Customer Images and Videos
Filter Reviews
- purchase
- small
- repairs
- application
- ease of use
- thickness
- packaging
- material
Rating
Locale
1 to 5 of 16 Reviews
1 – 5 of 16 Reviews
Most Recent
1 out of 5 stars.
Bernzomatic Aluminum Brazing & Welding Rods
2 months ago
I did not use these aluminum welding rods and returned to local store for refund,
Helpful?
1 out of 5 stars.
not worth it
9 months ago
I couldn't get it to stick no matter how hot the part gets
Helpful?
Response from BernzomaticProductsExpert:
8 months ago
BernzomaticProductsExpert
These products are now manufactured and managed by Harris Products Group. You can contact their Customer Service team at 1-800-733-4043. Thank you!
4 out of 5 stars.
Works great
2 years ago
Works great for what it’s designed for.
Helpful?
4 out of 5 stars.
This product worked while another brand did not.
2 years ago
I needed to braze two aluminum 2x2 inch extrusion elbow joints together for solidity. I tried another brand which did not melt until the aluminum did. I bought the Bernzomatic AL3 rods and they worked properly. I used an infrared thermometer during heating of the aluminum with a MAP gas torch to monitor the heating process. It took longer than I expected for the aluminum to get up to 730F but when it was finally there, the application of the rod went smoothly like soldering. The result is a rock solid weld so I'm good with this.
Yes, I recommend this product.
Originally posted on Worthington Industries, Inc.
2 out of 5 stars.
maybe acceptable for hobby or decorative work
2 years ago
This product is not very useful for work on anything that needs to hold any kind of load or pressure. it might be good for soldering popcans together or something like that. I found that on thin aluminum lines, it would make a reasonable good looking joint, but the line would crumble right next to the edge of the solder. the line was new aluminum tubing. notes about the flux in other reviews are true: you'll have to clean material with a stainless steel brush before starting. I found it gave best results to actually tin the joint, and then wire brush in the flame to clean the surface through the molten solder, then apply a second run of solder to give a good finish. buy lots of you are going to try it, and you'll need a good mapp gas torch too like a ts8000. in the end your repair probably won't last, so probably best to just save your money and buy a new part or save up and buy a TIG :).
No, I do not recommend this product.
Helpful?
1 – 5 of 16 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 13 Questions
Most helpful answers
Q: Can I use this to braise two aluminum tubes together?
4 years ago2 Answers
A: Yes you can, I used these to fill a large hole in an aluminum pipe. Just make sure you don’t overheat the tube otherwise it will melt.
4 years agoHelpful?
Q: How long are these rods?
6 years ago2 Answers
A: The length would be 12 inches.
6 years agoHelpful?
Q: Can I use this to bond aluminum to stainless steel?
a year ago1 Answer
A: Hi there, thanks for reaching out! We'd recommend to exclusively use these rods when building up aluminum joints.
a year agoHelpful?
Q: Would this work on a muffler?
6 years ago1 Answer
A: This it not a recommended use of this product. While it may work there is no guarantee of its effectiveness or that it would hold long term.
6 years agoHelpful?
Q: Are these aluminum solder rods food safe for use on repairing a small hole in an aluminum pot?
6 years ago1 Answer
A: These rods are not recommended for any type of food consumption items.
6 years agoHelpful?
Q: I need to repair a patio chair I believe is made of a white metal. Will this product adhere to this metal
6 years ago1 Answer
A: It will depend on the exact metal of the patio chair. As most patio furniture is made from aluminum this brazing rod can be used. However, if you have not used aluminum solder in the past it is recommend you practice on scrap metal first if possible. When soldering please ensure that the joint is clean and to not overheat it.
6 years agoHelpful?
Q: I’m considering using these to fill a few 1/4” holes in an aluminum boats transom, which is 1/16” thick sheet. I read someone who said they got warping doing the same. I’m thinking a Oxy/propane tor this to get to temp quicker. Will that work? Too risky?
6 years ago1 Answer
A: Interesting project! Using the Oxy/propane torch will be too hot for this application and would cut through the metal. A TS8000 torch will have sufficient enough heat for this application but shouldn’t burn through.
6 years agoHelpful?
Q: I am planning on repairing a crack on my aluminum boat. The crack spans between and around the rivet. Imagine the - is the crack and the o is the rivet. It looks like this --o---o---. Will this product work with a standard propane torch?
7 years ago1 Answer
A: Yes, you could use those solder rods but we would suggest using MAP-PRO fuel instead of Propane.
7 years agoHelpful?
Q: Will this product solder pot metal to aluminum? I am looking for a product which I can use to repair or modify model cars made from unknown metals (most likely pot metal).
10 years ago1 Answer
A: Thank you for your interest in Bernzomatic products. Our AL-3 rods consist of aluminum and zinc. "Pot metal" also contains a lot of zinc, therefore the melting temperatures ( 850 degrees melting point of our AL-3) of these two are too similar. You may melt your material as well as the AL-3 rod. Standard solder ( whether a plumbing solder or more appropriate metal work solder) may be best due to the much lower melting point of 400-500 degrees of these solders. If you have any additional questions please call 1-800-359-9678 or email: Bernzomatic@WorthingtonIndustries.com
10 years agoHelpful?
Q: Will this bond to brass, and if so do I require a flux
10 years ago1 Answer
A: Thank you for your interest in Bernzomatic products. Yes, this can be used for aluminum to brass connections. When used on aluminum to aluminum connections, the rods are a special formulation allowing flux not to be required. When used for other materials, Yes, flux is required. A typical plumbing flux will suffice. If you have any additional questions please call 1-800-359-9678 or email: Bernzomatic@WorthingtonIndustries.com
10 years agoHelpful?
1 - 10 of 13 Questions
