MotoMaster
MotoMaster Classic Steel Garage Jack, 3-Ton
#009-1047-6
$199.99
Top RatedExclusive
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
- Features
- Specifications
- Resources
MotoMaster Classic Garage Jack has dual cylinders allow you to reach vehicle chassis quicker
Automatic bypass prevents jack damage through over-pumping
Lift range: 5-1/2 - 18-1/8" (14 - 46 cm)
Steel frame with baked enamel finish
Saddle and rear swivel wheels for easy positioning
Cast iron wheels
Convenient mechanical gear joint to engage/disengage the release valve
Suitable for compact and mid-size passenger vehicles; SUVS and minivans; and light trucks
For safety reasons always use jack with axle stands and stand in pairs
| Part Number | DJ-GJ-010 |
|---|---|
| Accessories List | Casters |
| Advanced Features | Adjustable Height, Fast Lifting |
| Assembled Height (cm) | 19.00 cm |
| Assembled Height (ft) | 0.62 ft |
| Assembled Height (in) | 7.48 in |
| Assembled Length (cm) | 57.00 cm |
| Assembled Length (ft) | 1.87 ft |
| Assembled Length (in) | 22.44 in |
| Assembled Weight (kg) | 29.10 kg |
| Assembled Weight (lb) | 64.15 lb |
|---|---|
| Assembled Width (cm) | 34.00 cm |
| Assembled Width (in) | 13.39 in |
| Assembled Width (mm) | 340.00 mm |
| Certifications | ANSI Certified |
| Finish | Powder Coated |
| Handle Length (cm) | 94.50 cm |
| Handle Length (in) | 37.20 in |
| Maximum Lift Height (cm) | 46.00 cm |
| Maximum Lift Height (in) | 18.11 in |
| Maximum Weight Capacity (g) | 2721000.00 g |
| Maximum Weight Capacity (kg) | 2721.00 kg |
| Maximum Weight Capacity (lb) | 5998.77 lb |
| Minimum Lift Height (cm) | 14.00 cm |
| Minimum Lift Height (in) | 5.51 in |
| Number of Pieces | 1 |
| Package Depth (cm) | 69.00 cm |
| Package Depth (in) | 27.17 in |
| Package Height (cm) | 20.00 cm |
| Package Height (in) | 7.87 in |
| Package Weight (kg) | 33.00 kg |
| Package Weight (lb) | 72.75 lb |
| Package Width (cm) | 37.00 cm |
| Package Width (in) | 14.57 in |
| Primary Colour | Black |
| Primary Material | Steel |
| Product Use(s) | Automotive |
| Type of Lift/Stand | Floor Jack |
Warranty
This product carries a 1 year exchange warranty redeemable at any Canadian Tire store.
Compare Similar Products
Only Show Differences | Currently Viewing | |||||
| Ratings | ||||||
| Accessories List | Casters | Casters, Handle | Casters, Handle | Casters, Handle | Casters, Handle | |
| Advanced Features | Adjustable Height, Fast Lifting | Fast Lifting, Low-Profile, Handle Bumper, Heavy Duty, Overload Protection | Adjustable Height, Easy Adjustments, Overload Protection, Includes Crank/Handle | Fast Lifting, Handle Bumper, Heavy Duty, Overload Protection | Fast Lifting, Heavy Duty, Low-Profile, Handle Bumper | |
| Assembled Height (cm) | 19.00 cm | 22.00 cm | 15.70 cm | 22.00 cm | 22.00 cm |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Suitable Cons could not be generated at this time.
Reviews
Customer Images and Videos
Filter Reviews
- purchase
- price
- quality
- satisfaction
- parking
- ease of use
- large
- sturdy
Rating
Locale
1 to 5 of 136 Reviews
1 – 5 of 136 Reviews
Most Recent
5 out of 5 stars.
Great jack
3 years ago
Well made, fast lift. Heavy duty. Decent price…..
Yes, I recommend this product.
Helpful?
5 out of 5 stars.
Floor jack review
4 years ago
Floor Jack Worked as it should when use to Jack car up
Yes, I recommend this product.
Helpful?
1 out of 5 stars.
Only got a year of use out of it before it stopped working
4 years ago
It did work great for the 1st year, but it has since stopped being able to hold up any load. Can't return now that it's > 1 year old. I think the piston seals are shot. I only used it about twice a year, but I store it in an unheated shed throughout winter (freeze conditions) - not sure if this is a problem. I wouldn't recommend it.
No, I do not recommend this product.
Helpful?
4 out of 5 stars.
Quality jack
4 years ago
The jack is high quality and well made. Sturdy but heavy.
Yes, I recommend this product.
Helpful?
5 out of 5 stars.
Motomaster steel jack
4 years ago
Lifted my F150 without any issues. Seems heavy enough for home use. I will update if any problems occur over time.
Helpful?
1 – 5 of 136 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 45 Questions
Most helpful answers
Q: +Is this jack serviceable? Oil leaking over the floor would seem to be a common problem especially if the jack is used often. Is it possible to open the cylinder to change o-rings or seals and are these parts available from Canadian Tire? Thanks
17 years ago3 Answers
A: No, this is a disposable product. When it fails it is more than just seals.
14 years agoHelpful?
Q: How to replace the hydraulic fluid? I can only find the fill hole.
5 years ago2 Answers
A: Jack oil should only need to be fully replaced if there is reason to believe it is contaminated. Otherwise, a top up should be sufficient for most maintenance events. If you would still like to replace the oil: open the pump release valve using the handle (as you would to lower the jack); open the fill hole plug; invert the jack over a drain pan and allow the oil to drain from the fill hole; pump the jack for a few cycles to purge remaining oil from the system. Once fully drained, turn the jack upright and fill the jack with oil. Pump the jack for a few cycles to purge any air, top off the oil, and replace the fill plug.
5 years agoHelpful?
Q: release too fast?? I picked this up and it seems that you cant control the speed of the release. It releases/lowers the car quite fast. Is this normal for this jack?
11 years ago2 Answers
A: You are probably opening the release valve too much. a 1/4 turn or less is all that you need.
10 years agoHelpful?
Q: where is a good location in the front and rear to lift the vehicle so as to not damage the underbody
11 years ago2 Answers
A: every vehicle is different, with a unibody you need to find the lift points or risk damaging the body look in your user manual on how to raise vehicle.
11 years agoHelpful?
Q: Is it possibly to fix the speed lift? My jack still works it just doesn't lift up to the axle as fast as it used to. I'm wondering if there is a way to fix this.
14 years ago2 Answers
A: Sounds like it may be either low on oil or jack has been subject to a rough rolling surface causing oil to airate. Add more Hydraulic oil and allow air to bleed out over night and re-check If problem persists, one of the pump valves may have a cracked O-ring and require replacement. Ask a Canadian Tire representitive if service kit is available if warranty has expired.
13 years agoHelpful?
Q: How many pumps does it take to get to max. height under load? ... assume any normal midsize car/truck is being lifted...
14 years ago2 Answers
A: Speed-lift only works when not under load, do not expect this to be a fast jack. Number of pumps depends on how far you pump the arm, which depends on space and how much you want to bend. I would say on average a good 30 pumps to get it to max.
14 years agoHelpful?
Q: Hauteur maximale? Bonjour! Ce cric peux s'élever jusqu'à combien de pouces/centimètres? Ce n'est pas spécifié dans les caractéristiques... Merci!
16 years ago2 Answers
- Translate with Google
A: 18 pouces
15 years agoHelpful?
Q: How much does this jack weigh?
17 years ago2 Answers
A: The jack weights approx. 85 lbs.
17 years agoHelpful?
Q: What is the lifting range (min and max height) of this jack?
17 years ago2 Answers
A: 18 inches from what the information says
15 years agoHelpful?
Q: How does this jack lower the vehicle. Not asking the mechanism but how slow does it let your vehicle down? I got the big red recently and was alarmed by how violently it let my vehicle down. Wondering if this is any better
5 years ago1 Answer
A: In order to lower the vehicle safely it is important to turn the jack handle slowly for a controlled release.
5 years agoHelpful?
1 - 10 of 45 Questions
