Mastercraft
Mastercraft 120V Flux Core MIG Welder
#058-8195-2
$399.99
Best SellerTop Rated
Buy Online :
- FREEAvailable
- Available
- Available
Pick up at Leduc, AB
Get it Today !4 In Stock
Pick up available 09:00 a.m., Dec 04
Quantity updated to 1
Also Find It in Store:Aisle 22
Only 4 left
at Leduc, AB
Add to Registry
Quebec residents: For information on maintenance and repair click here.
Similar Items
Product Details
The versatile Mastercraft Mig and Flux Welder has polarity control that lets you change between polarities with speed. Four-setting heat selection and infinite wire speed control make this 80 Amp flux core welder the perfect tool for your shop. It comes with a 2-in-1 spool holder, spool adaptor for 4-in and 8-in spool wires, plus a high efficiency transformer and drive deck with dedicated power supply.
Can be used for both MIG and flux core wire
Infinite wire speed control
Four setting heat selection
MIG and flux core polarity control - quickly and easily change polarity settings
High-efficiency transformer
Thermal overload protection with light
Drive deck with dedicated power supply - helps to maintain constant wire speed
2-in-1 spool holder and a spool adaptor for 4" (10 cm) and 8" (20 cm) spool wires
Handle with cord wrap to easily carry and store
| Part Number | 90200050048 |
|---|---|
| Minimum Weldable Thickness (in) | 0.04 in |
| Maximum Weldable Thickness (in) | 0.19 in |
| Minimum Weldable Thickness (mm) | 1.00 mm |
| Maximum Weldable Thickness (mm) | 4.76 mm |
| Input Voltage (V) | 120 V |
| Output Amperage (amps) | 80 A |
| Duty Cycle | 20 |
| Welding Process | MIG |
| Output Voltage (V) | 34 V |
| Certifications | CSA Listed |
|---|---|
| Assembled Height (in) | 14.17 in |
| Assembled Weight (lb) | 41.87 lb |
| Primary Material | Metal |
| Primary Colour | Blue |
| Polarity | DC |
| Accessories List | Consumables |
| Number of Pieces | 1 |
| Power Source | Hardwired/Plug In |
| Display Type | Analogue |
| Advanced Features | Arc Stability |
| Input Hertz (Hz) | 60 Hz |
| Assembled Width (in) | 9.37 in |
| Assembled Length (in) | 17.52 in |
Warranty
- 3 yr repair warranty. This product has replaceable parts. For details contact MASTERCRAFT Customer Support at 1-800-689-9928
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Compare Similar Products
Only Show Differences | Currently Viewing | ||||
| Ratings | |||||
| Minimum Weldable Thickness (in) | 0.05 in | 0.04 in | 0.05 in | 0.02 in | |
| Maximum Weldable Thickness (in) | 0.19 in | 0.19 in | 0.19 in | 0.25 in | |
| Minimum Weldable Thickness (mm) | 1.20 mm | 1.00 mm | 1.20 mm | 0.60 mm |
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Weekly Deals
Frequently Bought Together
Current item
$541.96
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Suitable Cons could not be generated at this time.
Reviews
Filter Reviews
- price
- purchase
- satisfaction
- small
- ease of use
- quality
- metal
- for beginners
Rating
Locale
1 to 5 of 172 Reviews
1 – 5 of 172 Reviews
Most Recent
4 out of 5 stars.
Affordable and good quality
3 months ago
Good little buzz box. I've welded 1/4 inch with no worries. Excellent for body work.
Helpful?
5 out of 5 stars.
120 V welder
3 months ago
This little welder has at current worked great
I have only used the flux core wire at current and it worked great for building my work bench
The instructions that it came with were quite helpful as i am not a welder by trade
It is small compact stores easy
Helpful?
5 out of 5 stars.
Welder
4 months ago
Have not used it yet but plan to in the future it was a good price on sale
Helpful?
5 out of 5 stars.
So Far so good
5 months ago
I haven't used it yet . but I will let you know . from other reviews it sounds like a great welder I bought it just for light gauge sheet metal " auto body repair "
Helpful?
1 out of 5 stars.
Dangerous
6 months ago
DANGEROUS!! DO NOT BUY!
The power cord goes inside the casing right into the fan.. I couldn't figure out why my fan was making a noise when it's brand new.. inspected the back and noticed as I moved the power cord, the noise kept changing. I put a flashlight to it and noticed the power cord goes right into the fan and touches the blades.. this could have burned my shop down or possibly electrocuted me had I not noticed
No, I do not recommend this product.
Helpful?
Response from Canadian Tire:
6 months ago
Ask And Answer
Thank you for your review, we will be reaching out to you.
1 – 5 of 172 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 193 Questions
Most helpful answers
Q: How much amperage does this draw? My garage is wired on a 15 amp breaker, do i need to upgrade the wiring?
13 years ago8 Answers
A: My 15A breaker would trip multiple times per usage. It was also dedicated (I used the dedicated receptacle for my central vac in my garage). I ended up running a 20A circuit to the garage and have had no issues since. So TL;DR it will work but it will likely annoy you. Having the breaker trip mid-weld is rage inducing.
2 years agoHelpful?
Q: sur du 110 ou du 220 volts ?
13 years ago5 Answers
- Translate with Google
A: 110 volts
5 years agoHelpful?
Q: Instruction manual says not to use on anything thinner than 18 gauge. My sheet metal for body work is 22 gauge. Will this work well on it or will it burn it?
7 years ago4 Answers
A: I've had this welder for about a year ... just welding little things here and there, nothing overly fancy or technical. As the others have said, 22 gauge is thinner than 18 gauge. I've been able to weld 22 gauge sheet metal, but it is very dicey because you can easily blast through. It's fine for doing some quick tack welds. In terms of running a bead, I've had some luck on the lowest voltage and a slightly higher than recommended wire feed speed so I can move at a faster pace. But I'd recommend doing quite a few practice runs before moving on to your actual work piece.
6 years agoHelpful?
Q: Is the solenoid valve for MIG welding built into the unit?
8 years ago4 Answers
A: There is a mechanical solenoid in the handle of the whip.
3 years agoHelpful?
Q: What's the Part# for the Gas Fittings? I've seen it asked a few times but the response is typically a yes it can be bought or call a number. What's the Part# for the gas hookup fittings? Be nice to see price/availability before buying the welder.
9 years ago4 Answers
A: Don't worry about part numbers, wherever you buy your flow meter and gas from will probably be able to supply the proper fittings. The flow meter comes with a proper gas hose to connect ton the welder. I trimmed a short piece of the internal hose off of mine to ensure I had the proper connection and also replaced the installed fitting for a more robust one. The connection hose to the gas tank that mine came with was completely useless.
3 years agoHelpful?
Q: Can I weld stainless steel with this welder?
a year ago3 Answers
A: Yes, my son welds stainless steel all the time with it.
a year agoHelpful?
Q: Would I be able to weld 3/16 Steel Angle with this unit?
a year ago3 Answers
A: yes great little unit for small jobs bought on sale and great value for money
a year agoHelpful?
Q: Does this do aluminum welding? How thick?
4 years ago3 Answers
A: If you’re serious about aluminum be trained and a good welder. Also spent a couple grand and get the right tools for the job. Aluminum welding requires high frequency. This is a buzz box. This is entry level.
a year agoHelpful?
Q: Can I weld aluminum with this welder?
6 years ago3 Answers
A: I have welded aluminum with this welder, it doesn't look great and you need to mess around a lot with settings and wire thickness but it is possible in a pinch. Requires argon or argon/helium gas. Do not rely on it as your main aluminum option, AC tig or a welder with a spool gun will be much more repeatable.
5 years agoHelpful?
Q: hi is this a 110 volt or 220 volt can gas be hooked up
7 years ago3 Answers
A: CT Team obviously didn't understand the question! This is a 120V welder and yes, you can hook up inert gas!!
6 years agoHelpful?
1 - 10 of 193 Questions
