Mastercraft
Mastercraft 10A Sliding WetTile Saw, 7-in
#055-6740-2
$399.99
Exclusive
Unfortunately, this product is discontinued in your selected store and nearby stores.
You may be interested in these similar products shown below.Similar Items
Quebec residents: For information on maintenance and repair click here.
Product Details
Any tiling job around the home or at the job site is easy for this sliding saw. Let the blade do all the work as you zip through all manners of tile like a pro (up to 18.5” or 13" diagonal). Does the job like the bigger, more expensive brands, but at a fraction of the cost.
The Mastercraft 7" Sliding Wet Tile Saw is ideal for cutting through ceramic, slate, terracotta, marble and granite floor or wall tiles
Glide rail system slides the blade for accurate cuts
Blade tilts 0-45° for making inside or outside bevel cuts
60° right mitre gauge for precise angled cuts
Large 18-1/2" x 15-5/8" table for cutting large tiles with ease
Water pump with filter keep the workpiece and the blade clean and cool
Removable drain plug for fast and easy cleanup
Includes: sliding wet tile saw, 7" (17.8 cm) diamond-tipped blade, blade wrench, socket wrench, mitre gauge, work fence, clamp assembly, blade guard, and water pump with filter
Motor: 120V, 60Hz, 10A
Single-speed: 5,000 RPM (no-load)
Blade diameter: 7" (17.8 cm)
Table size: 18-1/2" x 15-5/8" (47 cm x 39.7 cm)
Maximum cutting length: 18.5" (47 cm)
Maximum diagonal cutting length: 13" (33 cm)
Weight: 36 lb 6 oz (16.5 kg)
| Part Number | Z1E-MZ-180 |
|---|---|
| Amperage | 10 A |
| Case Type | Not Included |
| Cord Gauge (ga) | 16ga |
| Cord Length (m) | 2.44 m |
| Cord Type | Plastic |
| Diagonal Cut Capacity (cm) | 33 cm |
| Maximum Cut Depth (cm) | 2 7/8 cm |
| Motor Type | Brushed |
| No-Load Speed Range (rpm) | 5000 - 5000 |
| Number of Accessories | 8 |
|---|---|
| Package Depth (cm) | 90.20 cm |
| Package Depth (in) | 35.51 in |
| Package Height (cm) | 34.90 cm |
| Package Height (in) | 13.74 in |
| Package Weight (kg) | 20.70 kg |
| Package Weight (lb) | 45.64 lb |
| Package Width (cm) | 52.70 cm |
| Package Width (in) | 20.75 in |
| Product Model Number | Z1E-MZ-180 |
| Rip Cut Capacity (cm) | 47 cm |
| Saw Type | Wet |
| Table Tilt (degree) | 45 ° |
Warranty
- 3 yr limited repair. For customer support, call Mastercraft Hotline at 1-800-689-9928
Online Ordering
- Pick Up is free at most stores (some stores require a minimum order value before tax)
- Shipping fee is based on size and weight of products and distance from address to store
- Same-Day Delivery costs $9.99 per order
- Online Ordering Information
Returns
- Most products can be returned or exchanged at any Canadian Tire store within 90 days of purchase
- Some products are non-refundable and non-exchangeable
- The return policy outlined above may not apply to the product you are currently viewing. For complete details and eligibility, please refer to our Return Policy for exceptions.
Shop Related Products
- Weekly Deals
- Customers Also Viewed
- Top Trending Products
- More From This Brand
Review Highlights
List of Pros Highlights
Pros
List of Cons Highlights
Cons
Reviews
Customer Images and Videos
Filter Reviews
- sawing
- cutting
- purchase
- price
- dings
- satisfaction
- value
- accuracy
Rating
Locale
1 to 5 of 105 Reviews
1 – 5 of 105 Reviews
Most Recent
3 out of 5 stars.
Does not cut straight
2 years ago
I've had this saw for a few years and it works fine for home jobs but it does not cut straight. I've wasted a number of tiles trying to manipulate the position of the tile for a straight cut because the two fence parts for the tile to usually rest against are not in alignment with one another and creep out so you get angled cuts.
By the time I realized it wasn't human error, the warranty was expired. Now I'm trying to use it again, and it's so frustrating and I'm hesitant to start risking expensive tile sthat need to be cut. I can't find any online fixes either :(
Yes, I recommend this product.
Helpful?
1 out of 5 stars.
Good saw, but bad size
5 years ago
Just bought one, hoping I can cut/rip 24" tiles, but it is short of about 2 inches. Very disappointing. :(
No, I do not recommend this product.
Helpful?
1 out of 5 stars.
Moteur ....
6 years ago
J ai acheté cet article et l'ai laisser ds sa boîte pendant près de 1an . Après avoir fait une trentaine de coupe avec j'en étais satisfait . Cet année voulant aider un ami je décide de l apporter et l utiliser pour poser de la céramique . Après une coupe un bruit de grichage est sorti du moteur et le braker sur la scie n:arrete pas d embarqué . . . J ai démonté celui-ci et vu que le rotor du moteur électrique était grugé par le stator .... Ça fait cher la coupe ! Ben décus
Translate with GoogleNo, I do not recommend this product.
Helpful?
5 out of 5 stars.
Great value. Adjust the fence before first use!
6 years ago
Purchased this saw several weeks ago to tile a tub surround. It's done a great job working with fragile ceramic subway tile. The frame is easy to remove from the tub for cleaning. Note that like a table saw, the fences must be squared to the blade prior to first use if you want accurate cuts.
A bit noisy (expected for this type of motor) and the blade lubrication system works well. The mess is well contained within the tub. Draining is easy by placing the tub over a 5 gallon bucket and pulling the drain plug.
Helpful?
4 out of 5 stars.
Good saw not so good blade
6 years ago
The stock blade has an uneven rim, and chips tile on the upturn, It's definitely a good idea to invest in a better blade. The saw cuts straight, and it's a good deal when it's on special. I also took the pump out of the pan and stuck it in a clean water source to extend the life of the pump.
Helpful?
1 – 5 of 105 Reviews
Questions
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 38 Questions
Most helpful answers
Q: What is the max tile size that will fit? The frame and brackets seem like they would limit the size of tile that could be cut - I am considering an 18" square floor tile for an upcoming project, would this tile size fit through this saw?
17 years ago5 Answers
A: When operating the saw per the instructions (pushing the saw forward) 18" is about it, however an approx 21" length can fit if you choose to pull the saw toward you instead. Put a little more water in the tray to dip the spinning blade to lubricate it (the water pump feeds the side of the blade away from you). It's a little messier and more difficult to keep things square but 21" is doable in a pinch.
13 years agoHelpful?
Q: What is the maximum depth of cut?
15 years ago4 Answers
A: I have cut 1 /12 slate brick with it with no problem.
13 years agoHelpful?
Q: Can this saw cut paving stones/blocks?
11 years ago2 Answers
A: Depends on how thick or long they are
10 years agoHelpful?
Q: How do you get the flanges for a 5/8" arbor? I called 1-800-689-9928 to order these flanges but they couldn't help. If there is a part number or something I would appreciate it. The 7/8 arbor that comes with the unit is difficult to find saw blades for cutting special items like glass. This has been the only downside to the unit so far.
11 years ago2 Answers
A: I was able to order the 5/8" arbor by calling 800-689-9928. Shipped right to my house in a week.
11 years agoHelpful?
Q: wet saw isnt cutting the same on both sides I just bought a 7in sliding wet tile saw from Mastercraft. The saw is leaving one side perfectly cut but the other side is chipped and ragged. Tried a few different things but nothing has changed and we have already ruined 5 tiles.
11 years ago2 Answers
A: I found that the chipping typically occurs on the unsupported side so I hold on to that side and keep it against the blade.
11 years agoHelpful?
Q: Can I cut 24 inches tiles with that saw
11 years ago2 Answers
A: 18'' max
10 years agoHelpful?
Q: A number of reviews identify problems wrt straight cut alignment. Has MasterCraft done anything in terms of design to address/resolve this issue? Also, will this saw cut at 45 degrees for 16" tiles?
12 years ago2 Answers
A: All you need to do is loosen the bolts that are attached at the front and the back of the saw which is attached to the tray. You will also need to loosen the bolts that are used as the stops for angle cutting. Do not use a square. I found it easier to use a 12"x24" tile.
11 years agoHelpful?
Q: the Mastercraft 7" slide tile saw doesn't start I used the Mastercraft 7" slide tile saw a coupe a of weeks ago. Everything was fine. the power is good. The reset was tried. Still not working
12 years ago2 Answers
A: This happened to me. It appears that the spring that pushes the carbon brush onto the rotor became overheated and lost its elasticity (i.e. it became stiff and brittle). Since the spring is integrated into the brush the unit will need to be replaced. This was not very expensive and the folks at the 1-800 number were very helpful to order another one. Fortunately the design of the motor is such that accessing the brushes is only a few seconds work (unlike most motors I've worked on!). Just remove the 4 screws that hold the cover on (they are on the opposite side of the motor that the blade is on) and then pull off the brush assembly on each side. The "bad" brush will be the one that doesn't spring back when you push it in :)
11 years agoHelpful?
Q: Assembly The manual indicates you need to do the following 2 steps: 1) attach handle to saw 2) attach pump to the tray The pump was already attached to the tray - is this correct (and the manual is wrong) or did I get someone else's returm?
13 years ago2 Answers
A: Pump was already attached for me... had the new tool smell so I know it wasn't a return. :-)
12 years agoHelpful?
Q: Does this Tile Saw come with a stand?
13 years ago2 Answers
A: No it doesn't.
13 years agoHelpful?
1 - 10 of 38 Questions
