MotoMaster OE Plus
Filtre à huile MotoMaster OE Plus MOCH9018
#017-7726-4
9,89 $
prix était 10,99 $
Rabais 10%
SoldeMieux notés
Achetez-le en ligne :
- GratuitOffert
- Stock épuisé
- Offert
Ramassage à Leduc, AB
Ramassage entre le 30 oct. - 31 oct.
Besoin d’une livraison aujourd'hui :
- 1 En stock
- 1 En stock
- 3 En stock
Quantité mise à jour à 1
Trouvez-le également en magasin:
En rupture de stock au Leduc, AB
Ajouter au registre
À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.
Besoin d’aide pour l’installation?
Les services automobiles sont disponibles dans votre magasin
Objets similaires
Produit Détails
Le filtre à huile MotoMaster OE+ MOCH9018 offre une protection avancée pour les moteurs modernes. Ce filtre à huile OE+ est conçu pour résister aux températures et aux pressions extrêmes grâce à ses composants améliorés, y compris un mélange synthétique qui emprisonne les particules de saleté fines. Vous pouvez utiliser le filtre avec de l'huile classique en un clin d'oeil ou prolonger votre intervalle d'entretien en utilisant l'huile synthétique. Il est compatible avec les deux. Pour les conducteurs qui recherchent une filtration de qualité supérieure, ce filtre MotoMaster peut offrir à votre véhicule une protection de performance prolongée.
- Caractéristiques
- Spécifications
- Ressources
Conçu pour être utilisé avec des huiles moteur classiques et synthétiques
Efficacité de filtration de plus de 99 %
Matières filtrantes fabriquées d’un mélange synthétique
Conçu afin de répondre ou de surpasser les spécifications de l'équipement d'origine
Protection éprouvée jusqu'à 24 000 km, lorsqu'utilisé avec une huile à moteur entièrement synthétique
Dimensions (L x la x H) : 62 x 62 x 90 mm (2,45 x 2,45 x 3,56 po)
Numéro de pièce : MOCH9018
| Numéro de modèle de l’article | MOCH9018 |
|---|---|
| Cote de microns | 99,00 µm |
| Diamètre extérieur du bas | 6,20 cm |
| Diamètre extérieur du haut | 6,20 cm |
| Diamètre intérieur du bas | 5,01 cm |
| Fonctionnalités avancées | Clapet antiretour, Soupape de décharge de dérivation |
| Hauteur de l'article (cm) | 9,10 cm |
| Hauteur du paquet (cm) | 6,99 cm |
| Hauteur du paquet (po) | 2,75 po |
| Largeur du paquet (cm) | 6,99 cm |
| Largeur du paquet (po) | 2,75 po |
|---|---|
| Liste d’accessoires | Aucun accessoire inclus |
| Matériau du filtre | Fibre de verre synthétique |
| Numéro de pièce du fabricant | MOCH9018 |
| Poids du paquet (kg) | 0,09 kg |
| Poids du paquet (lb) | 0,19 lb |
| Profondeur du paquet (cm) | 3,63 cm |
| Profondeur du paquet (po) | 1,43 po |
| Type de filtre | Synthétique |
| Type de joint d'étanchéité | Joint torique |
Garantie
Si cet article est défectueux, il est couvert par la garantie du fabricant. Dans le cas où aucune garantie n'est indiquée, cet article est couvert par une garantie de un an honorée dans tout magasin Canadian Tire.
Acheter des produits connexes
- Offres hebdomadaires
- Les clients ont aussi consulté
- Vers les produits tendances
- Plus de cette marque
Offres hebdo
Points saillants de l'evaluation
List of Avantages Highlights
Avantages
List of Désavantages Highlights
Désavantages
Évaluations
Images et vidéos du client
Filtrer les avis
prix
qualité
achat
en cas d'urgence
performance du moteur
valeur
pour les pneus
nettoyage
Cote
Paramètre régional
1 to 5 sur 152 commentaire
1 – 5 sur 152 commentaire
Les plus récents
5 étoile(s) sur 5.
Oil Filter
- Acheteur vérifié
il y a un mois
5 étoile(s) sur 5.
Great oil filters for the money
- Acheteur vérifié
il y a 3 mois
These are really good filters. I find they are as good as other premium brands but for Less cost.
Traduire avec GoogleUtile?
3 étoile(s) sur 5.
Canadian Tire works for me
- Acheteur vérifié
il y a un an
1 étoile(s) sur 5.
No thanks
- Acheteur vérifié
il y a 2 ans
Outrageous prices. I only bought it because I was pressed for time. I can buy it online for 1/3 of the price and no stupid environmental taxes applied either.
Traduire avec GoogleUtile?
4 étoile(s) sur 5.
Little bit cheaper, still good
- Acheteur vérifié
il y a 2 ans
Fits car, includes o ring, filters oil and doesn't tear. Little bit of a deal from buying a Fram.
Traduire avec GoogleUtile?
1 – 5 sur 152 commentaire
Questions
Commencez à taper votre question et nous vérifierons si elle a déjà été posée et répondue.
1 - 10 sur 11 questions
Réponses les plus utiles
Q : What company manufactures the OE oil filter.
il y a 6 ans4 Réponses
R : They are not made by FRAM, cut them apart and you'll see how much better the OE Plus is than the FRAM. These are made by Champion Laboratories in Albion, Illinois. This is also the parent company of Luber-Finer.
il y a 3 ansUtile?
Q : Why does this filter seem smaller then the other brands its for a 2007 rav4 2.4l the fram filter i removed is bigger in size. I am installing your MOPH4967 it is smaller and the thread in housing seems to get tight only after turning a full turn ?
il y a 3 ans3 Réponses
R : Hi there, thank you for the question. The MotoMaster OE Plus Oil Filter Part # MOPH4967 is not the correct filter to install in a 2007 Toyota Rav7 2.4L. The following are the recommend filters: MotoMaster Oil Filter Part # MPH4386: Canadian Tire SKU # 017-1724 FRAM Extra Guard Oil Filter Part # PH4386: Canadian Tire SKU # 017-5513 FRAM Tough Guard Oil Filter Part # TG4386 (typically for high mileage drivers): Canadian Tire SKU # 117-2366
il y a 3 ansUtile?
Q : Is there something wrong with the part finder? I bought the MOPH6607 as listed for my 2017 Nissan Rogue -- did not fit at all and wasn't even the same size as the old part. Had to reuse old filter for now.
il y a 3 ans1 Réponse
R : Hi there, thank you for your question. I recommend visiting the service department of your local Canadian Tire to have one of the technicians inspect the unit bought as the MotoMaster OE Plus Oil Filter Part #MOPH6607 is the correct oil filter for your vehicle. Other filter options for your vehicle include: FRAM Ultra Synthetic Oil Filter Part #XG6607: CTC Product #017-4503 Castrol SFX Premium Oil Filter Part #CAS6607: CTC Product #117-2711
il y a 3 ansUtile?
Q : What has the 30 micron, 99% rating changed to when the kilometer rating coverage changed from 16,000km to 24,000km
il y a 3 ans1 Réponse
R : Hi there, The efficiency rating is based on removing particles greater than 30 microns. After extensive testing with our trusted vendor the kilometer rating coverage on this product was able to change from 16,000km to 24,000km.
il y a 3 ansUtile?
Q : Advertized with a 24,000 KM rating? All the packaging on product says 16,000 KM life span.
il y a 4 ans1 Réponse
R : Hi there, we have increased our kilometer rating coverage from 16,000km to 24,000km after extensive testing with our trusted vendor. As we cycle through old packaging which state the 16,000km life span, the newly improved packaging will state the increased life span.
il y a 4 ansUtile?
Q : How long is the change interval for part MOPH9688 (2013 Hyundai Veloster Base) oil filter?
il y a 5 ans1 Réponse
R : Hi Robert, our MotoMaster OE Plus oil filters are proven to protect your vehicle's engine for up to 24,000 km's when paired with a fully synthetic motor oil rated for the same protection. It's highly recommended that you consult your Owner's Manual for specific oil and filter requirements for your specific vehicle.
il y a 5 ansUtile?
Q : I wonder why are oil throughput holes on the inside of Motomaster OE Plus filter are so small compared to those on filters of other brands (Fram, Quaker State, Mobile 1, etc)? I don't see how having smaller throughput openings can be good for oil flow.
il y a 5 ans1 Réponse
R : Hi Anton, the backplate differences are cosmetic only. The contact surfaces with the mounting base is exactly the same on both. Both plates have the same threads, thread pitch diameters, and more importantly, the same distance from the top of the gasket to the start of the first thread. Burst and pulse strength is also the same on both. Installation “feel” is the same. From a fluid flow point of view they are also identical. Pressure drop across both filter assemblies is the same. Or, in other words, oil flow rate is the same at a given differential pressure.
il y a 5 ansUtile?
Q : How come oil throughput holes on the inside of these filters are so small? They almost looks like closed louvers. Are they supposed to be like this by design? I don't see how this can be good for oil throughput speed/capacity.
il y a 5 ans1 Réponse
R : Hi Anton, the backplate differences are cosmetic only. The contact surfaces with the mounting base is exactly the same on both. Both plates have the same threads, thread pitch diameters, and more importantly, the same distance from the top of the gasket to the start of the first thread. Burst and pulse strength is also the same on both. Installation “feel” is the same. From a fluid flow point of view they are also identical. Pressure drop across both filter assemblies is the same. Or, in other words, oil flow rate is the same at a given differential pressure.
il y a 5 ansUtile?
Q : I have a 2006 Honda element this oil filter seems to be much smaller than the regular Honda filter or the Canadian tire red cannister filter Im just a little concern about that what do you think Is there another OEM spec black filter # for my H element
il y a 5 ans1 Réponse
R : Based on the vehicle specifications you've provided, the corresponding MotoMaster OE Plus oil filter which is compatible with your Honda Element 2.4L is CTC SKU 017-7777 or part number MOPH7317.
il y a 5 ansUtile?
Q : The OEM plus filter I bought for my Honda element from Canadian tire seems to be a little smaller than my regular Honda filter would that make a difference with anything having to do with the oil flow in my car
il y a 6 ans1 Réponse
R : Hi there, the backplate differences are cosmetic only. The contact surfaces with the mounting base is exactly the same on both. Both plates have the same threads, thread pitch diameters, and more importantly, the same distance from the top of the gasket to the start of the first thread. Burst and pulse strength is also the same on both. Installation “feel” is the same. From a fluid flow point of view they are also identical. Pressure drop across both filter assemblies is the same. Or, in other words, oil flow rate is the same at a given differential pressure.
il y a 5 ansUtile?
1 - 10 sur 11 questions
