CANADA'S STORE Made for Life in Canada

Credit Offered* Learn More

PRODUCT SET-UP: Light Bulb/Light Strip

  1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
  2. Install your smart light bulb in a light fixture and turn the light fixture ON
  3. If the bulb is flashing, continue to step 4. Otherwise set it to pairing mode by cycling the light ON/OFF about 4-5 times with 1-2 second intervals in between ON and OFF.
  4. Make sure Bluetooth and Locations Services is enabled on your mobile device
  5. In the NOMA iQ™ app, select the ‘+’ symbol on the top right-hand corner to add the device
  6. Select the smart light bulb and follow the prompts in the app

  1. Verify your Wi-Fi network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel
  2. Plug in your smart light strip and turn it ON
  3. If the light strip is flashing, continue to step 4. Otherwise set it to pairing mode by pressing and holding the power button for 3-4 seconds until it starts flashing.
  4. Make sure Bluetooth and Locations Services is enabled on your mobile device
  5. In the NOMA iQ™ app, select the “+” symbol on the top right-hand corner to add the device
  6. Select the smart light strip and follow the prompts in the app

Yes, NOMA iQ™ smart bulbs can be placed in fixtures/lamps that are plugged into smart plugs/switches.

  1. In the Home page, select the smart bulb/ light strip you want to restore to factory settings
  2. Click on the Settings icon
  3. Scroll down and click on 'Delete Device'
  4. Select 'Confirm'
  5. The device is now removed and in pairing mode

Yes, smart bulbs can be used in ceiling fans.

The NOMA iQ™ bulbs are recommended for indoor use only.

Yes, the NOMA iQ™ bulbs can be used in enclosed fixtures.

Just simply trim the NOMA iQ™ light strip to adjust the length.

1. Install your NOMA iQ™ smart light bulb into the fixture you wish to use it in.
2. Turn on the light on for 1 second and off for 1 second, 5 times.
3. Your light bulb will flash on and off to indicate it’s in pairing mode
4. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device

1. Connect the power cord to the corresponding port on the controller
2. Connect the light strip to the square connector on the controller
3. Plug the power cord into an electrical outlet
4. Press and hold the button on the controller for 3-4 seconds
5. The light strip will flash on and off to indicate that it’s in pairing mode
6. Open the NOMA iQ™ app on your mobile device and click the plus ‘+’ icon at the top right corner of the home screen to pair the device