Seasonal Maintenance Service

Why this is important

In addition to an oil change, other preventive maintenance routines should be performed to prepare for each season.

What's included

	Oil change.
	Tire rotation.
	Top up of windshield washer, power steering fluid and transmission fluid.
	Lubrication of door locks and hinges.
	Visual inspection of drive axle boots/seals.
	Visual inspection for leaks.
	Analysis of timing belt (based on mileage).
	Written vehicle inspection report

When to have this done

We recommend upgrading your oil change service to a Seasonal Maintenance service at least twice a year*.

*This recommended service interval is based on industry average. Please refer to your owner's manual.

See also:
Brake Fluid Flush
Power Steering Fluid Maintenance

Understanding Engine Oil

Understanding the difference between motor oils is the key to choosing the right one for your vehicle. Consult your owner's manual or ask our Auto Service Representatives which is best for you and your vehicle.

Mulitigrade Conventional Oil: This is the most popular type. Made from petroleum, this oil offers good protection for your engine.

High Mileage Oil: Specifically formulated for vehicles with more than 120,000 km, this oil conditions seals to prevent leaks. It also includes superior cleaning agents that remove deposits to reduce burn-off and prevent loss of horsepower.

Synthetic Oil Blends: A combination of premium synthetic and conventional base oils. Synthetic blends are designed to guard against wear from cold weather starts and to reduce the formation of sludge and deposits. They also provide greater protection against oil breakdown at high temperatures.

Synthetic Oil: Designed to provide the best in cleanliness, wear protection, high temperature performance and consumption, this oil offers the best protection for your vehicle's internal engine components.

Oil Change

Why this is important

Maintaining clean engine oil is critical for reducing wear on internal engine components. Canadian Tire offers a comprehensive range of oil and filters for passenger cars, minivans, SUVs, and light trucks.

What's included

	Draining engine oil and replenishing with your choice of manufacturer-approved oil.
	Installation of new warranty-approved oil filter.
	Lubrication of chassis, suspension and steering system (where applicable).
	Vehicle Inspection report on: Lights Filters Cabin filter (if applicable) Coolant and hoses Drive belts and tensioners Battery, battery cables and terminals Wiper blades

---

Motomaster Formula 1 Synthetic 5W30 jug, 4.4L

Regular oil changes with this high grade oil can help keep your vehicle's engine running well for a long time.

	Protects your engine's vital engine parts and helps to reduce wear over time
	Meets API specification for today's modern gasoline engines
	Full Synthetic Base oils provide superior performance over conventional and synthetic blend products

Transmission Fluid Maintenance

Why this is important

Transmission fluid eventually becomes contaminated with small particles created by the wear of moving parts and breakdown of chemical properties. Failure to change transmission fluid and filters may allow these particles to clog the small passageways and valves in your transmission, impeding performance and causing irreversible damage.

What's included

	Draining of vehicle's automatic transmission fluid and removal of varnish and metal contaminants.
	Installation of transmission fluid (synthetic or synthetic-blend upgrade available at an additional charge).
	Replacement of filter and pan gasket, where applicable.

Did you know?

Transmission fluid lubricates vital internal components and transfers heat from the transmission to help regulate temperature - an important function, as heat is the number one cause of fluid breakdown.

---

Mobil 1 Synthetic Automatic Transmission Fluid

Designed to help you get the maximum life out of your automatic transmission.

	Optimized with long-term frictional properties to ensure you get the most out of your transmission
	Designed to deliver outstanding performance and protection in temperatures as low as -54° C

Coolant System Flush and Fill

Why this is important

Coolant system failure is a leading cause of mechanical breakdown. It is also one of the most neglected systems on the vehicle, despite being one of the most simple to maintain. Rust, scale, sludge and air reduce its effectiveness and can cause premature failure of components. When properly maintained, coolant prevents freezing and boiling in your engine and improves heat transfers. It also lubricates the water pump and prolongs the life of other system components. A regular flush and fill maintains the proper pH level while preventing a harmful build-up of scale, corrosion and debris.

What's included

	Coolant test for pH and freezing point to determine if coolant change is required.
	Pressure test system for leaks, including radiator cap.
	Removal (flush) of old engine coolant.
	Installation (fill) of up to 8 litres of coolant (upgrade to Long Life coolant available for an additional charge).
	Inspection of fan belt and other system components.
	Evaluation of your entire cooling system with a written Vehicle Inspection Report

	Evaluation of entire cooling system and written C.A.R.E. report.
	Coolant test for pH and freezing point to determine if service is required.
	Chemical treatment and pressure flush of your system to physically and chemically remove contaminants and old fluid.
	Installation of up to 8 litres of Prestone coolant (upgrade to Long Life coolant available for an additional charge).
	Coolant system conditioner.

Did you know?

The thermostat regulates engine temperature. A faulty thermostat can result in low heat or overheating, poor fuel economy, a knock or ping sound when accelerating, and low temperature readings. It can even cause a vehicle to fail an emissions test.

Did you also know?

---

Prestone Premixed Antifreeze/Coolant Jug, 3.78L

Designed to help ensure optimal performance from your vehicle's cooling system.

	Protects cooling system components from corrosion and degradation, while regulating engine temperature
	Works with any make or model of car and light duty truck
	Good for 5 years or 250,000 km with a complete flush and fill

Air Conditioning Health Check

Why this is important

Inadequate cooling can be caused by refrigerant leaks, high temperatures, high pressure, or by system restrictions caused by dirt, corrosion, moisture and air. This service determines what is required to bring the A/C system up to intended operating performance. It also ensures the system's ability to control passenger compartment comfort.

What's included

	Visual inspection of all air conditioning components.
	Check of refrigerant pressure.
	Check on vent temperature.
	Performance of an electronic leak detection test.
	Written report and estimate of any work that may be required.

Did you know?

The most common cause of poor air conditioning performance is a low refrigerant level. Because refrigerant is a gas, it escapes easily through worn valve seals and o-rings as well as through deteriorated hoses and damaged components. A system running on low refrigerant will inevitably lead to major component failure. Repairing small leaks in advance could save on large, costly repairs in the future.