To check on the availability of a product at a store near you, choose the "Select Store" link found on all product detail pages. This will take you to the STORE LOCATOR. Complete either the Address, City field or the Postal Code field and SEARCH. This will identify all stores in your search area. Select your preferred store from the ones identified and choose the Make this my store link. Once this selection is made, store availability will appear on all product detail pages.
Store Inventory Position
The store had at least one item available at the time we received their inventory information.
The store did not have this item at the time their inventory information was transferred to us, but may have added new stock since. We suggest you call the store to confirm availability.
We have no accurate information about this store's stock position. Please call the store for more information.
At any time, you may check inventory at another store by clicking on the Check inventory at other stores link found under the Store Inventory Update on each product details page, and then searching for mores stores by Address and City or by Postal Code.
If I want to check inventory for another product at the same group of stores, will I have to re-enter my Address, City or Postal Code?
No. Once you've selected which stores you want to check, you can close the window and navigate to another product. Click "Check Inventory" for the next product and we'll automatically bring up the inventory results based on your last search criteria. Should you want other stores, simply enter another province, city or postal code on the left.
Why can't I find my local Canadian Tire store on the list of results, even though I selected the right city?
If you checked inventory in a larger urban centre, the list of stores may be presented in alphabetical order on more than one page. Click on the page numbers at the top or bottom of the list, or on "previous/next" to see more stores. If you do not see page numbers in the results, we suggest you go back to the list of cities and find yours under another label, e.g., instead of "Richmond", you could look under "Vancouver Region" or "Vancouver". Alternatively, you can always enter the postal code of your home/office/cottage, etc.
Should I call ahead to double-check if the item will be available when I am ready to buy it in store?
Yes. We encourage you to call ahead to confirm the price and availability of the product you're interested in.
Once in a while, distribution problems may occur and a number of stores in a region may be out of stock on a particular item. It is best to call your local store to check the earliest availability date.
No. Although great care is taken in keeping the information on this website current, changes may occur without notice. We receive inventory information from our stores across Canada typically once a day and inventory changes during the day are not reflected in the information provided.
A core charge, sometimes called a casting charge, is a form of deposit you pay on a car part until returning your old part. If you do not have the old part with you at the time of purchase of the new part, you must pay the core charge. That charge is refunded to you when you return the old part. Like a bottle deposit, the charge is designed to encourage recycling.
Certain remanufactured parts such as alternators, starters, CV shafts, brake callipers, and distributors contain a "core" or recyclable component. When you purchase any of these parts, a core charge will be added to the purchase.
When you return the part, the recyclable component is returned to the part manufacturer for rebuilding and recycling.
Exchange the old part at the time of purchase; OR Bring the old/original part, in the replacement part's box, along with your purchase receipt to any Canadian Tire store within 90 days of purchasing the replacement part.
Stores will inspect the returned part to ensure the recyclable components are intact. If they are, the core charge will be returned. If they are not, then the customer will not receive a core charge refund.
Freight & PDI
A freight charge is added to large products such as ATVs to cover the cost of shipping.
PDI refers to the Pre Delivery Inspection fee. It is added to ATVs to cover the cost of wheel, handlebar and control levers installation, and battery charging and installation.
An environmental fee is a fee that is collected to help fund the disposal and recycling of household products.
This fee helps ensure that these products are collected, recycled, reused or, when that is not possible, disposed of in the most environmentally-friendly way.
In Quebec, Bill 60 legislation requires that advertised product prices include environmental fees and core charges. On canadiantire.ca, Quebec customers will see their store's environmental fees and core charges clearly displayed in the Total Price.
For a complete, up-to-date list of consumer goods carried by Canadian Tire that have been recalled, please use this link.
- Height - Stand straight and tall, in stocking feet, against the wall. Place a stiff paper on top of head, parallel to the floor and mark wall. Measure from mark to floor.
- Chest/Bust - Stand normally, arms at sides. Measure over the fullest part of chest/bust. Keep tape snug, not tight. For men, this may be under the arms at the widest area.
- Inseam - Stand in stocking feet with legs slightly apart. Measure from the crotch, along the leg and down to the floor.
- Head - Measure the circumference of the head with a tape measure, one inch (2.54cm) above the eyebrows.
Measure your foot following the guidelines provided:
- Measure your foot near the end of the day. This will compensate for the normal swelling that your feet experience each and every day.
- Put on the type of sock that you will normally be wearing for the footwear that you are about to select. As an example, if you wear a heavier sock with ice skates then wear these when measuring your foot.
- Measure both feet and select the size that is the larger. As you may be aware many people have one foot that is slightly larger than the other.
- While seated place your foot flat on a piece of paper.
- Using a pen or pencil, and holding it as straight upright as possible place marks on the paper at the tip of your big toe and at your heel.
- Using a ruler measure the distance between these two points in either inches or centimeters.
- Refer to the following North American and European footwear-sizing chart. Remember to repeat this exercise for your other foot and use the larger measurement when selecting your footwear.
|Inches||CM||Male Shoe Size||Female Shoe Size||European Size||UK Size|
|7||17.5||Youth 11||Misses 13||31||11|
|7 1/6||17.9||Youth 11.5||Girls 1||31.5||-|
|7 1/3||18.3||Youth 12||Girls 1.5||32||12|
|7 1/2||18.7||Youth 12.5||Girls 2||32.5||-|
|7 2/3||19.1||Youth 13||Girls 2.5||33||13|
|7 5/6||19.5||Junior 1.5||Girls 3||33.5||1|
|8||20||Junior 2||Girls 3.5||34||1.5|
|8 1/6||20.4||Junior 2.5||Girls 4||34.5||2|
|8 1/3||20.8||Junior 3||Girls 4.5||35||2.5|
|8 1/2||21.2||Junior 3.5||5||35.5||3|
|8 2/3||21.6||Junior 4||5.5||36||3.5|
|8 5/6||22||Junior 4.5||6||37||4|
|9 1/6||22.9||Junior 5.5||7||38||5|
Driving Gloves are designed to fit snugly so as to provide a good grip on the steering wheel. Keep in mind that kidskin leather is very supple and will stretch a small amount.
To determine your glove size, measure around the top part of your hand (over the knuckles, excluding the thumb) and use the chart below:
|Men's Sizes||Women's Sizes|
|Measurement||Glove Size||Measurement||Glove Size|
|7 1/2 - 8 in
(19.1 - 20.3 cm)
|S||6 - 6 1/2 in
(15.2 - 16.5 cm)
|8 - 8 1/2 in
(20.3 - 21.6 cm)
|M||7 - 7 1/2 in
(17.8 - 19.1 cm)
|8 1/2 - 9 in
(21.6 - 22.9 cm)
|L||7 1/2 - 8 in
(19.1 - 20.3 cm)
|Over 9 in
(over 22.9 cm)
|XL||8 1/2 - 9 in
(21.6 - 22.9 cm)
Alternate measurement for Driving Glove sizes
Measure the width of your palm and use this table:
|1 5/8" (4.2 cm)||XXXS|
|2 1/8" (5.4 cm)||XXS|
|2 5/8" (6.7 cm)||XS|
|3 1/8" (8 cm)||S|
|3 5/8" (9.2 cm)||M|
|4 1/8" (10.5 cm)||L|
|4 5/8" (11.8 cm)||XL|
|5 1/8" (13 cm)||XXL|
Mechanix Wear recommends that the gloves fit as snugly as possible. There should be no excess material at the ends of your finger tips. Use the same sizing guidelines as for driving gloves (above).
When sizing for an adult bike:
Keep in mind that our adult bikes are designed ideally for ages 14 and up.
|Leg Inseam||Frame size||Wheel size|
|32" and up
(81.28 cm +)
When sizing a youth or child's bike:
Leg inseam and rim size are important.
|Leg Inseam||Rim size|
|Less than 16"
- A bike helmet should sit level across the forehead, just above the eyebrows.
- A helmet should not have significant movement or wiggle before you begin adjusting the straps.
- Straps need to be snug against the face and chin, but not too tight.
- The helmet should not move more than about an inch in any direction when you move your head up and down or side to side.
- Helmets should not pull off no matter how hard you try.
- Remember that helmets should be replaced every three years.
|Head size||Helmet size|
|One size fits all|
|Head size||Helmet size|
|One size fits all|
|7 5/8" - 8 1/4"
|7 3/8" - 7 5/8"
|7 1/8" - 7 3/8"
Note: Measure from the base of your palm to the tip of your middle finger.
Grips / Sliders
|Grip / Slider||Women's
|Men's Shoe Size|
|Large||Sizes 11.5+||Sizes 10 - 13|
|Medium||Sizes 9.5 - 11.5||Sizes 8 - 10|
|Small||Sizes 7 - 9.5||Sizes 6 - 8|
Shoes - Curling shoes should fit the same way as your street shoes; i.e., if you wear a Size 7 street shoe you should wear a Size 7 curling.
Figure Skates are of narrow build, so you should take one full size larger than your shoe size For example, if your shoe size is 7, your figure skates should be Size 8.
Allow for your foot size as well as for your maximum inseam and chest sizes. The moulded boot fits like a street shoe, so select your normal footwear size and refer to the chart below for the other measurements.
|Foot Size Maximum||Maximum Inseam Size||Maximum Chest Size|
|Size 8||32" (80cm)||41" (102.5cm)|
|Size 9||33" (82.5cm)||42" (105cm)|
|Size 10||34" (85cm)||43" (107.5cm)|
|Size 11||34" (85cm)||44" (110cm)|
|Size 12||35" (87.5cm)||45" (112.5cm)|
|Size 13||35" (87.5cm)||46" (115cm)|
'Youth', 'Junior' and 'Senior' are often used to describe sizes of hockey equipment and generally refer to the player's age group. If specific sizing in inches or centimeters is available, these sizes are provided.
Player Age Group
|Youth||Misses||Ages 4 - 9|
|Junior||Girls||Ages 9 - 12|
Elbow pads and glove size go hand in hand and must be fitted together. To determine elbow and glove size, measure from the tip of the middle finger to the mid-point of the elbow and add 1" to allow for the padding. The elbow pad/glove you choose should match this measurement. For example, if the physical measure is 14", the total length of the selected glove/elbow pad combo should be 15".
Please refer to above section on "Elbow Pads".
To order the proper size of helmet, measure the circumference of the head with a tape measure. Please note: helmets include some allowance for adjustment within the size ranges specified by the manufacturer.
|Small||20 1/8" - 22" (50 - 56cm)|
|Medium||21 5/8" - 23-1/2" (54 - 60cm)|
|Large||22"- 23 7/8" (55 - 61cm)|
|Junior||20 1/2 - 22 1/2" (51 - 56cm)|
|Small||21" - 22-1/2" (53 - 57cm)|
|Medium||22" - 23-1/2" (56 - 60cm)|
|Large||23" - 25" (58 - 63.5cm)|
|Small||19 1/2" - 21 1/4" (49.5 - 54cm)|
|Medium||21 1/4" - 22 1/4" (54 - 56.5cm)|
|Large||22 1/4" - 24" (56.6 - 61cm)|
|Helmet/Face Guard Combo|
|Small||18 4/5 - 20 2/5" (47 - 51cm)|
|Medium||20 - 21-3/5" (50 - 54cm)|
|Large||21-1/5 - 22-2/5" (53 - 56cm)|
|Small||20 1/2" - 22 3/4" (52 - 58cm)|
|Medium||20 7/8" - 22 3/4" (53 - 58cm)|
|Large||22" - 23 7/8" (56 - 61cm)|
In general, pants should fit according to waist size; however, if taller than average, buy a size up for extra length and protection in the thigh area.
|Youth||S||18 - 20" (46 - 51cm)|
|M||20 - 22" (51 - 56cm)|
|L||22 - 24" (56 - 61cm)|
|XL||24 - 26" (61 - 66cm)|
|Junior||XXS||20 - 22" (51 - 56cm)|
|XS||22 - 24" (56 - 61cm)|
|P||24 - 26" (61 - 66cm)|
|M||26 - 28" (66 - 71cm)|
|L||28 - 30" (71 - 76cm)|
|Senior||XS||28 - 30" (71 - 76cm)|
|S||30 - 32" (76 - 81cm)|
|M||32 - 34" (81 - 86cm)|
|L||34 - 36" (86 - 91cm)|
|XL||36 - 38" (91 - 96.5cm)|
|XXL||38 - 40" (96.5 - 101.6cm)|
While seated, and wearing skates, measure the leg from the middle of the kneecap to the top eyelet of the skate. Subtract 1 /2 to 1" from the measurement and match this to the length of the shin pad.
Proper fit affords the best protection.
|Age Group||Size||Chest Size||Height|
|Junior||XXS/XS||Up to 28" (71cm)||Up to 4'|
|S/M||28 - 32" (71 - 81cm)||4' - 4' 10"|
|L/XL||32 - 36" (81 - 91cm)||4' 10" - 5' 6"|
|Senior||S/M||36 - 40" (91 - 101.5cm)||5' 4" - 6'|
|L||40 - 44" (101.5 - 112cm)||5' 8" - 6' 4"|
|XL/XXL||44" + (112cm +)||6' +|
Select one full size less than the regular shoe size. For instance, if you normally take a size 8 shoe, order a size 7 skate.
Women wishing to purchase men's hockey skates must first convert their size to a men's size by subtracting one and a half sizes from the normal shoe size. For example, a women's size 9 equals a men's size 7.5. Then subtract one size to determine skate size. In this example, the proper skate size would be a men's size 6.5. It may be necessary to purchase a Junior size skate in some cases. Some sample conversions are shown below.
Converting Women's skate size to Men's
|Skate Size||Men's Shoe Size||Ladies' Shoe Size|
|Size 6||Size 7||Size 8.5|
|Size 7||Size 8||Size 9.5|
|Size 8||Size 9||Size 10.5|
|Size 9||Size 10||Size 11.5|
Measure from the top of the ankle to three-quarters up the thigh. Here are some typcial sock conversions and age groups for proper fit.
|Age Group||Sock Length|
Wood sticks are flex-rated "mid", "stiff" and "extra stiff" and should be chosen according to the player's weight. Small, lightweight players should use a "mid" flex stick. Players of average weight should select "stiff" and players who are heavier or larger than average should select "extra-stiff.
Aluminum and Composite Sticks
Most aluminum and composite sticks are flex-rated. Select the stick based on the player's weight for his/her size. If lighter than average choose "mid flex", if average, "stiff" and, if heavier, "extra stiff".
Jerseys must fit loosely in order to cover all protective equipment and also to let the upper body breathe. Select based on the shirt/pullover size normally worn. For example, if you usually wear a men's large, choose that size for your hockey sweater.
These are adjustable and fit based on collar size. For instance, if you wear a size 15 shirt collar, choose a throat protector that fits 14" to 18" (35-45cm).
Skis - Stand barefoot on the floor and raise your arm above your head. The tip of the ski should reach the middle of your palm. Select this length of ski.
Ski Boots - Please refer to the footwear chart at the beginning of this section and note that all cross-country ski boots are only available in European sizes.
Ski Poles - Measure the distance from the floor to your armpit. That's how long your ski poles should be.
Click here to view the Material Safety Data Sheet.